Bebop 2 - Advanced


FTDI connection

Follow the instructions to connect to the Parrot Bebop 2 via FTDI.

  • Loosen the two Torx screws (T5) to take off the front cap. be
  • Use pins to connect to ground/RX/TX or solder cables onto the connectors. pa
  • Connect the FTDI cable and run
    screen /dev/ttyUSB0 115200
    to connect to the Bebop. ff
© PX4WIKI team all right reserved,powered by Gitbook该文件修订时间: 2017-05-03 05:50:05